Description
This battery package comes included with a in built 50 Amp Anderson on the side of the slim line battery. The 50 Amp Anderson is wired as bi-directional, meaning it can be used for either charging or discharging.
This package offers for a limited time, a BONUS Remote head package. The Remote head package is designed to connect to the 50 Amp Anderson connector located on the slim line battery, it will then allow the user a multiple connection point from the battery for more power options!
The Thumper Lithium LiFePO4 slim line 100 AH has been designed for those hard to fit locations where a standard battery would not be possible to fit.
Offering a huge 100 AH in battery capacity, this set up is available with and without outlets sockets fitted.
Thumper Lithium LiFePO4 batteries are fully sealed and are designed to be mounted on any angle for easy application.
Equipped with an internal battery management system (BMS), the Thumper Lithium offers safe charging and discharging with over temperature protection, under and over voltage cut off protection and also internal short circuit protection.
The LiFePO4range of batteries are less than half the weight of a traditional AGM battery, whilst still offering all of the benefits of a heavy duty deep cycle. These batteries are designed to hold the terminal voltage higher throughout each cycle, resulting in an increase depth of discharge and a longer overall run time with heavier draw appliances.
What feature this battery has that no other brand does?
The best feature of this battery is the capability to link it to any other brand Lithium battery! That's right! Usually lithium batteries require linking only to same SKU or to same make and model Lithium in order for the two cells to work in harmony.
We have changed the game with the Thumper Lithium!
The comprehensive BMS system within this Thumper Slim line model will allow the battery to link to any other LiFePO4 cell. The batteries will equalize (bulk charging first to the battery that requires the most charge) and will work to run in parallel, allowing the use of a single charging source.
Features:
• Slim line design
• Proven quality and reliability
• Higher voltage maintained for longer run times with appliances
• Compatible with chargers with an AGM or lithium setting
• For best results: Use of a lithium charger is recommended
• 3 year warranty
• Increased cycles compared to traditional lead acid
• Half the weight of a traditional lead acid battery
• Parallel connection is non-limited
• Designed to be wired in series 12 V ~ 48 V
• Designed to allow linking to any other brand lithium battery.
• IN BUILT Victron Bluetooth battery monitor!
This battery is NOT designed for starting purposes or for under bonnet application
This model slim line includes the following:
| 2 x |
120 Amp Blue Anderson connectors (inlet or outlet - bi-directional) |
|
1 x |
50 Amp Black Anderson connector (inlet or outlet - bi-directional) |
| 1 x |
Digital display meter, reads: - Percentage of battery capacity remaining - Voltage of battery remaining - Voltage of each cell within the battery |
| 1 x |
120 Amp Blue Anderson to 8mm ring terminal connecting lead |
| 1 x |
120 Amp Blue Anderson to 50 Amp Grey Anderson connecting lead |
| 1 x | Victron 500 Amp Bluetooth smart shunt built internally within the battery to allow for remote monitoring of all your loads to the and from the battery! |
Specifications of battery:
| Model No. | TLSL-100 |
| Nominal Voltage | 12.8V |
| Rated capacity | 100 AH |
| Cell Type | LiFePO4 / Prismatic |
| Dimensions: | L600 x W275mm x H65mm |
| Weight: | 20kg |
| BMS High temp cut out / Reconnect: | 80˚C / 50˚C |
| Discharge: | -20˚C ~ 60˚C |
| Charge: | -20˚C ~ 45˚C |
| Storage: | -5˚C ~ 35˚C |
| Recommended Charge Current: | 10 ~ 50 Amps |
| Max Charge Current: | 70 Amps |
| Max discharge current (continuous): | 100 Amps |
| BMS current cut off: | >150 Amps 10S |
| BMS Voltage cut off / Reconnect: | 10.0V / 12.0V |
| Self Discharge Rate per month: | ≤3% |
| Shipping Classification: | UN3480, CLASS 9 |
| Certifications: | CB / CE UN38.3 UL1642 @ CELL |
| Warranty: | 3 years from date of purchase |
Thumper Lithium slim line 100 AH Spec sheet
Victron Bluetooth monitor - Smart Shunt 500
Monitor your system direct from your smart phone or tablet!
That's right! We have included a Victron smart shunt with this slim line package to allow you to monitor the usage from your battery, as well as the remaining capacity just with a glance at your phone!
This is built internally within the battery and wired to all Anderson connectors to allow for an easy installation!
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.